KM46C Infrared Flame Temperature Imager-hjkir

KM46C Infrared Flame Temperature Imager

The KM46C online infrared flame temperature imager adopts an uncooled infrared thermal radiometer, a high-performance infrared lens and a signal processing circuit, and is embedded with advanced image processing algorithms. It has the characteristics of small size, low power consumption, fast startup, excellent imaging quality, and accurate temperature measurement.

The device selection of the KM46C online infrared flame temperature imager fully considers the requirements of high and low temperature working performance to ensure that the whole machine has excellent environmental adaptability.

PRODUCT FEATURES

The measurement wavelength is 4.5μm, which is specially used for flame temperature measurement imaging

It adopts high frame rate design, and the measurement frequency can reach 50Hz

The maximum temperature measurement range can reach 2000℃

It outputs full-stream lossless 16Bit temperature data, and provides client software and SDK development kit to facilitate customers to carry out secondary development and system integration, and fully conduct personalized temperature analysis of the measured target

The flame temperature can be monitored in real time during the industrial production process to ensure the safety and stability of the production process

Supports multiple data transmission methods, such as wireless or wired connections, which is convenient for integration with existing monitoring systems

Specifications

Detector
Detector Type	Medium Wave Uncooled Focal Plane Microbolometer
Number of pixels	640×512
Wavelength range	4.5μm
Thermal sensitivity（NETD)	≤1k@600℃
Frame rate	≤50Hz（Configurable）
Image processing and display
Color Palette	Multiple color palettes including white hot, black hot, iron red, rainbow, etc.
Contrast, brightness	Automatic/Manual
Data Format	16Bit Temperature data (full stream)
Temperature measurement analysis
Temperature measurement accuracy	±2℃ or ±2%
Temperature measurement range	Range 1：600℃～1600℃ Range 2：1000℃~2000℃
Electrical Characteristics
Data Interface	RJ45
Web Standards	Gigabit Ethernet
Protocol support	UDP
Input power voltage	DC12V
Communication interface	UART@RS485
Steady-state power consumption	<4W
Reverse polarity protection	YES
Over-voltage and under-voltage protection	YES
Environmental parameters
Operating temperature	-20℃～60℃
Storage temperature	-40℃～70℃
Temperature shock resistance	5℃/min（-40℃～60℃）
Vibration resistance	4.3g, 2 hours for each of x, y and z axes
Shock resistance	Acceleration 30g, half sine wave, pulse width 6ms, impact 3 times in the installation direction
humidity	≤95%((non-condensing))
Lenses
focal length	Wide-angle, regular, telephoto lenses are available
Focus mode	Manual/Electric
Physical properties
Dimensions	40mm×40mm×65mm（Without lens）
weight	<100g
Mounting holes	Two M3×4 on each side
Client
Real-time temperature display	support
Various temperature measurement objects	support
Alarm function	support
Record/Photograph/Playback	support
SDK Development Kit
Operating Environment	Support win32、x64、Linux(x86/ARM)
Data Acquisition	Get 16-bit temperature data (full stream) through callback function